Disinfectant Stand Models

Companies or small businesses can select between a couple of different models. These are:

1. Wooden stand: Assembled and specifically selected wood panels.
2. Metal/aluminum stand: Wooden parts are replaced by thick metal sheets that allow painting.

In some cases, a combination of those materials might be used. For hotels, for example, it would be recommendable to use the lighter wooden base with metal legs. For heavier industry companies it might be better to use the metal ones.

Manual Disinfectant Stand

The manual disinfectant stand is our basic model. It is appropriate for hospitals or other public areas. Assembly could be done without legs, for example on walls or near entrance doors on the customized wood panel, where space might not be enough. If needed, legs of the stand might be stabilized to the floor for spaces like lifts, between floors near the doors, or other areas that are movable or there is a high risk of hitting the device with a heavy object, e.g. door.

Disinfectant Stand with Arm Lever

Manual disinfectant stand consists of a dispenser with a long spout. It allows firm pressing and is equipped against falling. Dispensers are not activated with the fingers or palm, but with the elbow. This means that there is no contact with the hands and the risk of infection is lowered to a minimum. It is ideal for crowded places.

Disinfectant Stand with Sensor

This disinfectant stand is like an automatic soap dispenser. Sensors are activated the moment a person cups their hands.  Enough the antiseptic solution will be spread, so that hands can be cleaned. This ensures appropriate amount of the fluid is distributed and prevents over usage. Every activation spreads 0.45 ml of the solution.

Disinfectant Stand with Pedal

The pedal option might be a preferred option for limited budget. A pedal is installed at the bottom of the stand. Every pressing of the pedal dispenses the required amount of disinfectant by a mechanism assembled at the back of the stand. The mechanism contains plastic materials.